PN4-GW2FP - Serial Communication Module - Solidot Technology
 

PN4-GW2FP

Realize data communication between PROFINET network and serial communication protocol network, can connect two RS232, RS485, RS422 serial devices to PROFINET network respectively, and support different communication baud rates and other settings. Convert the serial communication protocol device into a PROFINET network device.

Parameters

Downloads Cases

Interface data

Protocol PROFINET
Max. Number of IO Modules According to the master station
Data Transfer Medium Ethernet CAT5 Cable
Data Transfer Rates 100Mb/s
Electrical Isolation Yes
Connection Method 2*RJ45

Technical data

Current Consumption 47mA
Weight 100g
Module Size 102*72*25mm
Protect. Class IP20
Operating Temperature -10~60℃
Storage Temperature -20~75℃
Relative Humidity 95%, no coagulation.
Rated voltage 24VDC(18~36V)

Functional data

Serial Stop 1, 2 bit
Serial Interface Type RS485、RS232、RS422
Support mode Master-slave mode and producer-consumer mode (not supported by RS485)
The number of commands for master-slave mode switching The maximum support for adding 500 exchange commands
The number of commands exchanged in the producer-consumer pattern The maximum number of supported exchange commands is 1000, and the maximum number of elements supported is 2000
Serial Port Parameters Supported baud rates include: 1200bit/s, 2400bit/s, 4800bit/s, 9600bit/s, 19200bit/s, 35700bit/s, 38400bit/s, 57600bit/s and 115200bit/s. Other baud rates can also be customized as needed.
Verification method Odd, even, none
Data bit 7、8 bit

Downloads

  • Configfile

    PN4-GW2 series GSDML file

    Download
  • Tools

    PN4 gateway series config tools

    Download
  • Manual

    PN4-GW2FPuser manual

    Download

Contact

contact@solidotech.com
11F, Ang Ying Building, No.91 Shengli Road, Jiangning District, Nanjing, Jiangsu Province, China
Products
Documents
About

© Copyright NanJing Solidot Electronic Technology Co.,Ltd 2023. All Rights Reserved.