EC7-0808A
EtherCAT, Integrated I/O, 8DI, 8DO, NPN, 0.5A
IP67 protection level, suitable for harsh industrial environments
Based on high-performance EtherCAT ASIC communication chips, direct control, faster speed
Using standard cable wiring is simple and the layout is quick
The configuration is simple, supporting mainstream EtherCAT masters
Add
Interface Parameters
| Protocol | EtherCAT |
| Data Transfer Medium | CAT 5 or above UTP or STP (STP is recommended) |
| Data Transfer Rates | 100Mb/s |
| Distance Between Stations | ≤ 100m（station to station） |
| Electrical Isolation | 500V |
| Bus Connection | 2×M12，4Pin，D-code，blue |
Technical Parameters
| Power Supply | 18~36VDC |
| Weight | 480g |
| Module Size | 225×62×35.1mm |
| Protect. Class | IP67 |
| Operating Temperature | -25 ~ +70℃ |
| Storage Temperature | -40 ~ +85℃ |
| Relative Humidity | 95 %, no condensation |
| Power interface | 2×M12，4Pin，D-code，red |
| U<sub>S</sub>total current | Max：16A |
| U<sub>S</sub>power consumption | ≤35mA |
| U<sub>L</sub>total current | Max：16A |
| U<sub>L</sub>power consumption | 25mA + Sensor Supply Current + Load Output Current |
| Electrical isolation between GND<sub>S</sub> and GND<sub>L</sub> | YES |
Digital Input
| Nominal Voltage | 24 VDC(±25%) |
| Number of Inputs | 8 |
| Transistor Polarity | NPN |
| Input Current | 4mA |
| Electrical Isolation | 500V |
| Indicator | Green LED |
| "0" Signal Voltage | 15~30 V |
| “1” Signal Voltage | -3~+3 V |
| Input Interface | 8×M12，5Pin，A-code |
| Total Sensor Power Supply | Max：2A（from UL） |
| Isolation Method | Optocoupler isolation |
Digital Output
| Nominal Voltage | 24 VDC(±25%) |
| Number of Outputs | 8 |
| Transistor Polarity | NPN |
| Load Type | ohmic, inductive load |
| Max. Output Current | Max：500 mA（from UL） |
| Port Protection | overcurrent |
| Electrical Isolation | 500V |
| Indicator | Green LED |
| Output Interface | 8×M12，5Pin，A-code |
| Output total current | Max：4 A（from UL） |
| Isolation Method | Optocoupler isolation |
