EC4-PX02B - Pulse output module - Solidot Technology
 

EC4-PX02B

EC4-PX02B is an integrated oversampling high-speed output module that uses the EtherCAT industrial Ethernet bus. The module can be configured in PWM working mode or oversampling high-speed output mode, and can be externally connected to a laser driver. Using the PWM output mode, the output frequency and duty cycle can both independently modulate the PWM waveform to drive the external laser driver for laser power modulation. It can also use the oversampling high-speed output mode to achieve high-speed switching of lasers.

Parameters

Downloads Cases

Interface data

Protocol EtherCAT
Electrical Isolation Yes
Process data volume: Downlink 268 Bytes
Process data volume: Upstream 6 Bytes
Refresh Rate 1ms

Technical data

Weight 130g
Module Size 102×72×25mm
Protect. Class IP20
Operating Temperature -10℃~+60℃
Storage Temperature -20℃~+75℃
Relative Humidity 95%, no condensation

Functional data

Power supply voltage 24VDC
PWM output voltage 20.4V~28.8V
PWM output duty cycle 0%~100.0%
PWM output duty cycle adjustment accuracy 0.1%
PWM output duty cycle maximum error ±0.1%
PWM output frequency 0~20kHz
PWM output frequency adjustment accuracy 1Hz
PWM output limit parameters Under the condition of 20kHz, the duty cycle range is 1.0%~99.0% (if it's lower than 1%, it's all low; if it's higher than 99%, it's all high).
Channel Overload Protection Support
Oversampling high-speed output flip frequency 1MHz
Oversampling high-speed output data length 1000 bits
Maximum output current 1A per channel
Channel Short Circuit Protection Support
Channel overcurrent protection Support

Downloads

  • Manual

    EC4-PX02B Oversampling High-Speed Output Module User Manual

    Download

Contact

contact@solidotech.com
11F, Ang Ying Building, No.91 Shengli Road, Jiangning District, Nanjing, Jiangsu Province, China
Products
Documents
About

© Copyright NanJing Solidot Electronic Technology Co.,Ltd 2023. All Rights Reserved.